“Wireless Communication” is the way of communication in which the transfer of information takes place between two or more points that are not connected by an electrical conductor. The most common wireless technologies use electromagnetic wireless telecommunications, such as radio.
Here, we are publishing the list of the various wireless project ideas for engineering students. These are very interesting to learn and also helps in getting good growth in your career.
In this project, I have built a simple robot that can be controlled over a WiFi network. When the user inputs for the required direction of the movement of the Robot are provided through the WiFi.
However the purpose of this article, home automation is to make it easy for the do-it-yourself by employing computer software that will become the artificial intelligence to manage controllable tasks through the system. The projects in this article will allow an operator to operate the high-end smart home automation system.
In this project, we are going to build a home automation system using Arduino and WiFi module ESP8266. For control relays, we use manual switch and smartphones. This project can sense sunlight and room temperature to turn on and off lights and fans automatically.
A simple mobile phone detector project using a cheap LM358 op-amp. This mobile phone detector can detect the nearness of an active cell phone from a separated distance of four to five meters. So it can come helpful in an assessment lobby or gatherings where cell phones are not allowed.
A Bluetooth controlled robot using an Arduino and HC-05 Bluetooth module is a very interesting wireless project. Robotics is consistently a fancy topic for understudies, hobbyists, and DIYers. As a learner, constructing a robot is most likely one of the significant activities to do after finding out about the nuts and bolts.
In this project, radio communication technology is implemented to control the speed of the stepper motor. RF transmitter module with a control unit sends the control commands to the receiver module where the stepper motor is connected to it.